Printer Cup Parts

Name Description Press Manufacturer
19 Flat Rubber
19 Flat Rubber Click for Details

19 FLAT RUBBER SUCTION DISCS


Over 75 different sizes available up to 2" (OD) in 5 different thicknesses. Submit sample. Thicknesses of rubber available:

.020 - White - 1/2 mm
.032 - Pink - 1/32"
.040 - Tan - 1 mm
.062 - Beige - 1/16"
.080 - Green - 2 mm
Polyurethane (.032") also available.

19K-Kluge and Rudow Telescoping Suckers.
19 AB-DICK, 19HA - Hawes.
19H - Heidelberg Platen
19RZ - Royal Zenith.


Also for ATF, Bobst, Chief, Commander, Hamada, Heidelberg, KBA, Kluge, Komori, Man Roland, Miehle, Miller, Muller Martini, Multilith, Royal Zenith, Shinohara-Fuji, Speiss , and many others.

 

Size Charts

20 Washers
20 Washers Click for Details

20 MIEHLE VERTICAL WASHERS

A - Feedboard
B - Gripper bar
C - Gripper head (thin)

28 Feeder Cap
28 Feeder Cap Click for Details

28 MIEHLE FEEDER CAP

Plastic. Shuts off openings on feeder bar.

29A Miehle Vertical
29A Miehle Vertical Click for Details

29A - MIEHLE VERTICAL

Fluffer wires for paper.

29B Miehle Vertical
29B Miehle Vertical Click for Details

29B - MIEHLE VERTICAL

Fluffer wires for cardboard

29C Miehle Vertical
29C Miehle Vertical Click for Details

29C - THUMB SCREW

For fluffer wires. Includes washer.

30A Miehle Vertical
30A Miehle Vertical Click for Details

30A - MIEHLE VERTICAL

Air release valve. Used on feeder arm instead of #28 cap. Release a little air by turning screw. Excellent for cardboard and tissue.

30B Miehle Vertical
30B Miehle Vertical Click for Details

30B - MIEHLE VERTICAL

Cylinder Gripper. Complete only. Fits all Verticals.

34 Miehle Lever Key
34 Miehle Lever Key Click for Details

34 MIEHLE VERTICAL TRANSFER TABLE LEVER KEY

Keeps feedboard in place. Fits all models

35 Miehle Vertical Backstops
35 Miehle Vertical Backstops Click for Details

35 MIEHLE VERTICAL BACKSTOPS

Fits all plain boards. Simple instructions.

38A
38A Click for Details

38A ENDLESS BELTS

ENDLESS BELTS for Miehle & Kluge. Leather for Drive.
CONVEYOR TABLE BELTS for Multilith 1250 & 1250W fabric.

41A Pin Wrench
41A Pin Wrench Click for Details

41A PIN WRENCH

Straight type. Small and large.

Small is 5 1/4" long, 1/8" x 3/16" ends

Large is 9 3/4" long, 5/16" on both ends

41B Pin Wrench
41B Pin Wrench Click for Details

 41B PIN WRENCH

"S" type. Small

5 1/4" long, 1/8" x 3/16" ends